Maintenance Manual

Family 2 Displays a single participant.
Family 3 Displays the four most active participants
without seeing them scaled down to a small
size if there are lots of other participants.
Used when there are five or more video participants.
Family 4 Gives equal prominence to up to 20
conference contributors, and is useful for a
"roll call" of active participants.
The MCU automatically changes the layout to the 3 x
3 arrangement, and will continue to use this layout for
up to 9 participants. With 10 or more participants, the
4 x 4 view is used, and with 17 or more participants
the 5 x 4 view will be used. The MCU will then
continue to use this layout even if there are more than
20 participants.
Family 5 Gives prominence to two participants in the
center of the view while showing smaller
versions of other participants' video streams
above and below.
This view is useful for observing a dialog between two
participants or for viewing slides and a presenter.
Conference
custom
layout
Click Edit to choose or create a custom
layout to be used by any participant.
See Customizing layout views.
Participant
custom
layout
Click Edit to choose a pre-configured
custom layout for this participant.
See Selecting a custom participant layout.
Controls
These buttons control whether this
participant is permitted to change the layout
they see on the endpoint.
77
Cisco TelePresence MCU Series Online Printable Help