Maintenance Manual

■ After you set up pane placement, you can still change the layout for individual participants - and they can
change their layout using the far-end camera controls unless you disable this for each participant individually.
See Customizing a participant's layout display.
■ The left and right controls on a participant's far-end camera control, used to select a focused participant,
have no effect when pane placement is in use
■ Potentially, when pane placement is in use, a participant may appear in two panes at the same time. This
happens for example if a pane is configured to show a particular participant and another pane is configured to
show the loudest speaker; each time that participant is the loudest speaker, he will appear in both panes.
There is a setting on the MCU's Settings > Conferences page to control this behavior called Loudest speaker
pane placement behavior
Related Topics
■ Customizing a participant's layout display
■ Understanding how participants display in layout views
■ Content channel video support
Displaying Conference Statistics
You can display statistics about a conference and use the information to quickly see how many participants are
currently in the conference.
To access this option:
1. Go to Conferences.
2. Click a Conference name and then click the Statistics tab.
If the conference is active, statistics for that conference will be displayed. If the conference is completed only "No
longer active will be displayed.
Refer to the table below for information on interpreting this information.
Field Field Description
Start time When the conference started.
End time When the conference will complete. This will be the time at which the maximum duration of the
conference will have elapsed. This setting displays as <permanent> if it has been configured to
last forever.
Running time The duration of this conference.
62
Cisco TelePresence MCU Series Online Printable Help