Maintenance Manual

Layout control
via FECC /
DTMF
Prevents or permits conference participants
changing their view layout or focused participant
using far-end camera control (FECC) or DTMF tones
or both. Choose from:
■ Disabled: in this conference, participants will
not be allowed to change their view layout
using either FECC or DTMF, unless you have
overridden this setting in an endpoint's
individual configuration.
■ FECC only: in this conference, participants
will only be allowed to change their view
layout using FECC, unless you have
overridden this setting in an endpoint's
individual configuration.
■ DTMF only: in this conference, participants
will only be allowed to change their view
layout using DTMF, unless you have
overridden this setting in an endpoint's
individual configuration.
■ FECC with DTMF fallback: in this conference,
participants will be allowed to change their
view layout using FECC. If FECC is not
available, this participant will be able to use
DTMF.
■ FECC and DTMF: in this conference,
participants will be allowed to change their
view layout using both FECC or DTMF unless
you have overridden this setting in an
endpoint's individual configuration.
You may want to prevent participants from
changing their view layout in a managed
conference, or classroom environment.
This is a per-conference option, but you
can still configure Layout control via
FECC / DTMF on a per-participant basis.
For ad hoc conferences, you can
configure Layout control via FECC /
DTMF through the ad hoc conferences
template. You can also edit this setting for
individual active ad hoc conferences.
When calling out to an endpoint, if you
have configured Layout control via FECC
/ DTMF for that endpoint, it will override
this setting (otherwise the endpoint will
use the conference configuration for this
setting).
This setting will apply to endpoints which
connect to the conference via an auto
attendant or by dialing in directly.
36
Cisco TelePresence MCU Series Online Printable Help