Maintenance Manual

Timeout for
Type 1
automatic
lecture mode
one
This option is enabled if Type 1 automatic lecture
mode is selected. The option determines how
quickly the loudest speaker will appear in full-screen
view to the other participants. Choose from:
■ Immediately: As soon as the MCU identifies a
participant as the loudest speaker, the MCU
will show that participant in full screen to the
other participants in the conference. The
loudest speaker will continue to see their
normal continuous presence conference
view. If another participant interrupts the
loudest speaker, that participant becomes
the loudest speaker and will be seen in full
screen by the other participants (and that
participant will see their normal continuous
presence view).
■ After 10 seconds: When the MCU identifies a
participant as the loudest speaker, if that
participant continues to be the loudest
speaker for 10 seconds then the MCU will
show that participant in full screen view to
the other participants. The loudest speaker
will continue to see their normal continuous
presence conference view. If another
participant interrupts the loudest speaker,
everyone will immediately see their normal
continuous presence view. If the interrupter
continues to speak for 10 seconds, the MCU
identifies that participant as the loudest
speaker who will then be shown in full screen
to the other participants (and the new loudest
speaker will continue to see their normal
continuous presence view).
■ After 30 seconds: As for After 10 seconds,
but the MCU waits for 30 seconds before
showing the loudest speaker in full screen
view.
■ After 1 minute: As for After 10 seconds, but
the MCU waits for one minute before showing
the loudest speaker in full screen view.
■ Disabled: The loudest speaker will not be
shown in full screen view to the other
participants. All conference participants will
see the normal continuous presence
conference view, or a custom layout if one
has been specified.
31
Cisco TelePresence MCU Series Online Printable Help