Maintenance Manual

Shell not
secured for
startup
Disable the serial input
during startup.
If Disable serial input during startup isn't selected, the serial
console is not protected during application startup. This means
users will have access to debug services in the operating system.
To disable this, go to Settings > Security, and select Disable
serial input during startup.
Related Topics
■ Configuring security settings
■ Working with the audit log
■ Displaying system status
Logging Using Syslog
You can send the Event log to one or more syslog servers on the network for storage or analysis.
To configure the syslog facility, go to Logs > Syslog.
On this page:
■ Syslog settings
■ Using syslog
Syslog Settings
Refer to this table for assistance when configuring Syslog settings:
Field Field Description Usage Tips
Host
address
1 to 4
Enter the IP addresses of up to four
Syslog receiver hosts.
The number of packets sent to each configured host will be
displayed next to its IP address.
210
Cisco TelePresence MCU Series Online Printable Help