Maintenance Manual

ConferenceMe Displays the ConferenceMe page. The
ConferenceMe page allows users to join the
conference using the ConferenceMe client. If they
do not already have ConferenceMe installed on
their computer, they can access the installer from
the ConferenceMe page.
This option is only available if you have
ConferenceMe enabled on your MCU. To
enable ConferenceMe, go to Settings >
Streaming.
See Using ConferenceMe to join
conferences for more information.
Description Additional information about the conference,
which can assist users joining conferences.
You can add the description when scheduling a
conference. If you do not add a description or the
conference has not been scheduled in advance,
the description displays one of the following:
■ <scheduled>
The conference has been scheduled in
advance using the MCU web interface, but
the owner has not entered a description.
■ <ad hoc>
The conference was created dynamically
during an auto attendant session and will
end when the last participant using the
auto attendant exits the conference.
■ <auto attendant>
This type of conference indicates that a
participant is currently connected to the
auto attendant and navigating the menus.
Owner The configured owner of the conference. See Conference ownership for additional
information.
21
Cisco TelePresence MCU Series Online Printable Help