Maintenance Manual

Encryption not
available on
this device
Add feature key for
encryption.
To use encryption on your MCU you must have the Encryption
feature key installed. To purchase this feature key, contact your
reseller.
Default
encryption
setting for new
ad hoc
conferences
set to optional
Set encryption to required
in the template for new ad
hoc conferences.
When encryption status is Enabled, the MCU advertises itself as
being able to use encryption and will use encryption if required to
do so by an endpoint.
To rectify this problem, go to Conferences > Templates > Ad hoc
conferences. Set Encryption, to Required.
To use encryption on your MCU you must have the Encryption
feature key installed. To purchase this feature key, contact your
reseller.
SRTP
encryption
disabled
Enable SRTP encryption. When SRTP is disabled, the MCU will not advertise that it is able to
encrypt using SRTP.
To rectify this problem, go to Settings > Encryption. For SRTP
encryption, select Secure transports (TLS) only. This means that if
encryption is used for a call, the media will only be encrypted in
calls that are set up using TLS.
SRTP
encryption
enabled for all
transports,
including
insecure
transports
(UDP and TCP)
Enable SRTP encryption for
secure transports (TLS)
only.
To rectify this problem, go to Settings > Encryption. For SRTP
encryption, select Secure transports (TLS) only. This means that if
encryption is used for a call, the media will only be encrypted in
calls that are set up using TLS.
Default
encryption
setting for new
scheduled
conferences
set to optional
Set encryption to required
in the top level conference
template.
When you (or another user) create a new conference (by choosing
Conferences and clicking Add new conference), you can set the
encryption setting for the conference to be either Optional or
Required.
To ensure that all new scheduled conferences use encryption, go
to Conferences > Templates and for Encryption, select Required.
Streaming
page is public
Disable public streaming
page.
You can allow users access to the streaming list pages without
having to authenticate with the MCU. By default, these pages are
accessible to users who have not logged in.
To force users to authenticate before they can access the
streaming page, go to Settings > User interface, and in the Public
pages section, deselect Streaming.
Conference list
page is public
Disable public conference
list page.
You can allow users access to the conference list pages without
having to authenticate with the MCU. By default, these pages are
accessible to users who have not logged in.
To force users to authenticate before they can access the
conference list page, go to Settings > User interface, and in the
Public pages section, deselect Conference list.
209
Cisco TelePresence MCU Series Online Printable Help