Maintenance Manual

Displaying System Status
Displaying General Status 188
Displaying Conference Status 189
Conference Content Channel 193
Displaying Hardware Health Status 194
Displaying Security Status 194
Displaying cluster status 195
MCU Port Matrix 198
Displaying General Status
The General status page displays an overview of the MCU status. To access this information, go to Status>General.
Refer to the table below for details of the information displayed
Field Field Description
System status
Model The specific MCU model.
Serial number The unique serial number of the MCU.
Software
version
The installed software version. You will need to provide this information when speaking to
Customer support.
Build The build version of installed software. You will need to provide this information when speaking
to Customer support.
Uptime The time since the last restart of the MCU.
Host name The host name assigned to the MCU. You can change the host name at Network>DNS.
Slot number in
chassis
The slot number in the chassis in which the MSE 8000 blade is currently installed.This field is
only visible if the MCU is a blade.
If the MCU displays a message reporting that the blade is missing, ensure that each blade is
firmly secured in the chassis. Close both retaining latches on the front of the blade. Using a
number 1 Phillips screwdriver, tighten the screws in the retaining latches with a clockwise
quarter turn.
IP address The local IP address of the MCU network interface used to access the MCU web user interface.
CPU load The current processor utilization of the MCU.
Cisco Systems, Inc. www.cisco.com
188