Maintenance Manual

Failed
preconfigured
participants
redial
behavior
Defines whether and how the MCU will
redial preconfigured endpoints if the
connection fails:
■ Never redial
The MCU never attempts to
redial a failed connection to a
preconfigured participant.
■ Redial until connected
The MCU redials the
preconfigured participant if it
fails unexpectedly when first
establishing a connection; the
MCU never retries the
connection if it fails after being
established.
■ Redial on unexpected
disconnection
The MCU redials preconfigured
participants on any unexpected
disconnection, whether it occurs
while first being established or at
any point thereafter. It does not
attempt to redial if the
participant deliberately ends the
connection.
Note: A deliberate
disconnection, if it is not
correctly signaled by the
endpoint, may be interpreted as
unexpected. If you experience
this, reduce the call persistence
behavior for the affected
endpoint.
■ Redial on any disconnection
The MCU redials the
preconfigured participant when
the connection closes,
irrespective of whether the call
fails or is deliberately ended by
the participant.
This setting defines the box-wide behavior for
conferences dialing preconfigured participants. The
setting may be overridden by the corresponding setting
on individual preconfigured endpoints.
Although this box-wide setting applies only to
preconfigured endpoints, the equivalent option is
provided when you are inviting ad hoc participants.
162
Cisco TelePresence MCU Series Online Printable Help