Maintenance Manual

Overlaid
icons
Allows various in-conference icons to
be displayed on participants' endpoints.
Depending on the check boxes that are selected, in-
conference icons appear:
■ Important participant: a crown icon appears on all
participants' endpoints in the pane of the
participant that has become important.
■ Unsecured conferences: encrypted participants in
a conference where encryption is optional see an
icon indicating that there are other participants
who are unencrypted.
This icon is also visible to participants of an
encrypted conference if there are people
streaming that conference.
■ Tunneled camera control: an arrow icon appears
on their endpoint when one participant uses the
far-end camera control to control another's
camera.
■ Layout changes: an icon appears on their endpoint
when a participant changes their layout view.
■ Recording indicator: an icon (a red dot) appears
near the top left of the conference display to
indicate that the conference is being recorded. For
the recording indicator to display, the recording
must be made by an IP VCR running software
version 2.1 or later, and the connection between
the IP VCR and the MCU must be using H.323.
■ Audio participants: an icon appears near the top
left of the conference display to indicate if there
are any audio-only participants. To the right of the
icon, the number of such participants will be
displayed. If enabled, the icon will only display if
there are one or more audio participants.
Audio-only participants are participants that
cannot be viewed; either the participant's
endpoint cannot send video, the MCU has not
allocated a video port to the participant, the
participant has stopped their video, or the MCU
has stopped the video received from the endpoint.
■ Streaming participants: an icon appears in the top
left of the conference display to indicate if there
are any streaming participants in the conference.
If enabled, the icon will only display if there are
one or more streaming participants. Streaming
participants are people who are viewing and
listening to the conference using a web browser.
■ Media quality: an icon (video camera with a cross
through it) appears when a participant is
experiencing high packet loss or if the network
link's bandwidth is too low for the type of channel
to the MCU that the endpoint has established.
Refer to Using in-conference features with video
endpoints to see all in-conference icons and their
descriptions.
154
Cisco TelePresence MCU Series Online Printable Help