Maintenance Manual

Use full
screen view
for two
participants
When there are only two participants,
each participant will see the other in
full-screen view.
If selected, when there are only two participants in a
conference, this will apply regardless of which layout was
originally chosen for the conference. If you do not select
this setting, then the default family view is used with
unused panes blank.
Active
speaker
display
When in a conference, there is
generally one participant that the MCU
recognizes as the active speaker,
notionally the person currently speaking
the loudest. This setting determines
how the MCU displays that participant
in conference views.
■ None
With this setting, no special
action is taken when displaying
the active speaker.
■ Red border
Displays a red border around the
active speaker.
■ Green border
Displays a green border around
the active speaker.
Specifically, an active speaker is the participant who has
been identified by the MCU as the current loudest
speaker, and they are currently speaking. When you
choose to have a border display around the active
speaker, it will only display when that participant is
speaking.
Media port
reservation
Determines whether the MCU is
operating in Reserved mode (Media port
reservation Enabled) or Unreserved
mode (Media port reservation Disabled).
Note that if you set this field to Enabled, you will not be
able to create ad hoc conferences. See Port reservation
modes for additional information.
Audio
notifications
Allows various audible in-conference
features to be enabled or disabled.
The options are:
■ Conference timing: audible messages to indicate
when the conference's scheduled end time is
approaching.
■ Join and leave indications: audible messages
indicating when other participants join and leave
the conference.
■ Conference status: audible status messages for
example indicating to a participant that he is the
only participant in a conference.
153
Cisco TelePresence MCU Series Online Printable Help