Maintenance Manual

Configuring Network and System Settings
Configuring Network Settings 136
Automatic IPv6 Address Preferences 139
Configuring DNS Settings 140
Configuring IP Routes Settings 141
Configuring IP Services 143
Configuring SNMP Settings 146
Configuring QoS Settings 148
Configuring Network Settings
To configure the network settings on the MCU and check the network status, go to Network >Port A or
Network>Port B.
The MCU has two Ethernet interfaces, Port A and Port B. The configuration pages for the two interfaces look and
behave similarly, and so are described together. Differences will be noted as appropriate.
Port A and Port B can be configured to be allocated their IP addresses by DHCP (IPv4) or SLAAC/DHCPv6 (IPv6).
Connect Port A to your local network and connect Port B to a second subnet or the internet depending on your
application of the MCU.
On this page:
■ IP configuration settings
■ IP status
■ Ethernet configuration
■ Ethernet status
IP Configuration Settings
These settings determine the IP configuration for the appropriate Ethernet port of the MCU. When you have finished,
click Update IP configuration.
Field Field Description Usage Tips
Cisco Systems, Inc. www.cisco.com
136