Maintenance Manual

The video quality from this participant is poor.
The video quality from this participant is good.
Using Far-End Camera Controls
While in a conference, you might need to change the camera settings for one of the conference participants. For
example, if you want to zoom in on a particular speaker in a large group, or if you cannot see the speaker. To do this:
1. Change the camera control to "far".
2. Select the largest displayed participant pane.
3. Press Zoom. The far-end camera control icon appears, and you can now control the far-end camera.
4. Refer to the table below for assistance interpreting the icons that appear on-screen.
Icon Icon Description
You are now controlling the viewing angle of the far-end video camera.
You are moving the remote far-end camera down.
You are moving the far-end video camera up.
You are moving the far-end video camera to the left.
You are moving the far-end video camera to the right.
You are zooming in with the far-end video camera.
You are zooming out with the far-end video camera.
Understanding In-Conference Status Icons
During the conference, various icons might appear in top left of the conference display. The appearance of these
icons is controlled on the Settings > Conferences page (refer to Configuring global conference settings). Refer to the
table below for assistance interpreting these icons.
13
Cisco TelePresence MCU Series Online Printable Help