Maintenance Manual

Redial
behavior
Defines whether and how the MCU will redial
this endpoint if the connection fails:
■ <use box-wide setting>
This preconfigured participant inherits
the redial behavior setting that the
MCU uses by default for all
preconfigured participants. This
option is not available when you are
configuring ad hoc participants.
■ Never redial
The MCU never attempts to redial a
failed connection to this participant.
■ Redial until connected
The MCU redials this participant if it
fails unexpectedly when first
establishing a connection; the MCU
never retries the connection if it fails
after being established.
■ Redial on unexpected disconnection
The MCU redials this participant on
any unexpected disconnection,
whether it occurs while first being
established or at any point thereafter.
It does not attempt to redial if the
participant deliberately ends the
connection.
Note: A deliberate disconnection, if it
is not correctly signaled by the
endpoint, may be interpreted as
unexpected. If you experience this,
reduce the call persistence behavior
for the affected endpoint.
■ Redial on any disconnection
The MCU redials this participant when
the connection closes, irrespective of
whether the call fails or is deliberately
ended by the participant.
This setting defines redial behavior for an
individual participant, which overrides the box-
wide setting.
109
Cisco TelePresence MCU Series Online Printable Help