Maintenance Manual

Layout
control via
FECC / DTMF
Whether this endpoint is able to change their
view layout via far-end camera control
(FECC) or DTMF tones. Choose from:
■ use conference configuration: the
setting for Layout control via FECC /
DTMF will be determined by the
configuration of the conference
■ Disabled: the participant using this
endpoint will not be allowed to
change their view layout using either
FECC or DTMF. This option also
prevents the user from changing
layout with the in call menu.
■ FECC only: the participant using this
endpoint will be allowed to change
their view layout using FECC
■ DTMF only: the participant using this
endpoint will be allowed to change
their view layout using DTMF
■ FECC with DTMF fallback: the
participant using this endpoint will be
allowed to change their view layout
using FECC. If FECC is not available,
this participant will be able to use
DTMF
■ FECC and DTMF: the participant using
this endpoint will be allowed to
change their view layout using either
either FECC or DTMF, rather than only
using DTMF as a fallback.
This setting takes precedence over the per-
conference layout control setting for conferences
into which the endpoint is invited.
This layout control setting does not govern layout
control using the in call menu. The setting governs
layout control using the endpoint's DTMF or FECC
controls while the user is not using the menu.
103
Cisco TelePresence MCU Series Online Printable Help