Release Notes

Resolved issues
Cisco TelePresence Management Suite Release Notes Software Release Notes (14.4.1) Page 51 of 61
Systems Management
Identifier Description
CSCtz83514 Resolved the issue where it was not possible to add Cisco TelePresence MX300, Profile 55 and
SX20 systems which were registered to a Cisco Unified CM to Cisco TMS.
CSCua52567 Cisco TMS now downloads software and release keys for provisioned systems.
CSCua52587 Resolved the issue where enforcing management settings on a Cisco VCS in Cisco TMS
changed the external manager address set on the Cisco VCS from the FQDN of the Cisco TMS
to the IP address of the Cisco TMS.
CSCua65556 Resolved the issue where it was not possible to add systems to Cisco TMS if the default ISDN or
IP Zone value had been set to None in Administrative Tools > General Settings >Default
ISDN/IP Zone after initially creating the default zones during the install process. A “System not
found!” error was invoked.
CSCua26092 Resolved the issue where changing the URL Where Software Packages Can Be Downloaded:
in Administrative Tools > Configuration > Network Settings > General Network Settings
could cause a stack trace error when accessing the Systems > System Upgrade > Software
Manager page.
This happened if the IIS user Cisco TMS was running under did not have access to the folder
specified.
A valid error message will now appear.
CSCua26087 Removed the field SNMP Get Community Name: from Systems > Navigator > Select a system
> Connection tab for systems which do not support this setting, for example Cisco Unified CM
and Cisco TelePresence Server.
CSCua59944 Resolved the issue where no system name was displayed for systems which did not have a
name. This occurred in Systems > Event Notification Manager > edit an account in the Name
column. Select a system with No Name in the Select Systems column, and an event type in the
Select Event Types column, then click on the arrow to move it into the Stored Event
Notifications column and click Save. Now view the same account in Systems > Event
Notification Manager. Nothing is displayed in the System column for the system name.
CSCtr25908 Resolved the issue where endpoints running TC and TE software, and the Cisco VCS showed
the SNMP port as 0 instead of 161 in Systems > System Overview > Select a system from the
Systems folder list and SNMP Settings from System Parameters list > click View>SNMP port
column.
This is a hard-coded value in Cisco TMS, it is not read from the system itself.
Phone Books
Identifier Description
CSCua67525 Resolved the issue where incorrect data could be returned when searching via the View
Contacts tab in an Active Directory or H.350 Phone Book Source.
CSCua60451 Resolved an issue where if there were lots of phone book contacts without any contact
information, deletion of one manual contact could fail with an exception due to a time-out.
CSCua59896 Resolved an issue where synchronizing very large phone books could fail with an exception
due to a time-out.