Release Notes

Resolved issues
Cisco TelePresence Management Suite Release Notes Software Release Notes (14.4.1) Page 46 of 61
Systems Management
Identifier Description
CSCuc65075 Removed the warning given by Cisco TMS when trying to add a Cisco VCS using the VCS’s IP
address. As provisioning has been improved with Cisco TMSPE, there is no longer a
requirement for this warning.
CSCtx12293 Resolved the issue where a system took longer to upgrade than Cisco TMS expected and
therefore Cisco TMS reported the upgrade as unsuccessful. This issue applied to systems
running TC and TE software version 6 or earlier.
CSCud16380 Resolved the issue where if adding a system using SNMP, not all the systems capabilities were
added by the first Force Refresh.
CSCud07392 Resolved the issue in System Upgrade where if Upgrade ModeBasic was selected, both .pkg
and .zip files were displayed. Adding a .zip file is not a valid option here.
CSCua25689 Resolved the issue where adding a Cisco TelePresence MCU with only HTTPS enabled failed.
CSCud21809 Resolved the issue where a Cisco TelePresence MCU on a dual stack network could be added
twice to Cisco TMS.
CSCuc88048 Resolved the issue where Cisco TMS did not allow the administrator to specify a user name
when adding a Cisco VCS or a Cisco TelePresence Conductor. The problem occured if the
default 'admin' accounts were disabled.
CSCuc88015 Resolved the issue where it was not possible to remove an inaccessible VCS from a cluster.
CSCtr32285 Resolved the issue in Systems > Navigator > select system > Settings tab > Persistent
Settings, where the SIP URI field was empty even though the SIP URI had been set using
Systems > Manage Dial Plan.
CSCty20327 Resolved the issue where exporting option key values from all systems from the Systems
Overview page displayed the data as XML.
CSCud07618 Resolved the issue where Cisco TMS allowed adding a Cisco Unified CM several times.
CSCud10019 Resolved the issue where [IPV6] or ipv6 address (enclosed or not enclosed in square brackets)
were treated as separate entries when adding systems to Cisco TMS.
CSCty90084 Resolved the issue where Cisco TMS incorrectly displayed Cisco TelePresence MCU’s status
as In Call when there was no call remaining on the Cisco TelePresence MCU.
CSCtx03704 Resolved the issue where Systems > Navigator >System Status could incorrectly display as
Idle for Cisco TelePresence MCUs and Cisco TelePresence Servers when they were in a call.
CSCud07379 Improved the message where Cisco TMS displayed "an unexpected error has occurred" when
viewing a Cisco Unified CM in the System Navigator. The issue occurred when there had been
too many requests from Cisco TMS to the Cisco Unified CM over the last minute; the Unified CM
then refused the connection.
CSCud07411 Resolved the issue where the registration policy for the a Cisco VCS in Systems > Navigator
was wrong. It was always listed as Unknown.