Manual

■ If the designated default devices are busy.
■ If a call is not answered within the location's configured ring duration.
To associate devices to a location:
1. In Cisco TMS, go to System > Provisioning > FindMe, click the Location Templates container, and then in the
explorer view, click the location template to which you want to assign a device template.
2. In the Device Templates pane, click Assign Templates. The Configure Device Templates dialog box opens.
3. Select the appropriate check boxes to register devices as one or more of the following:
— Default —The initial device(s) to ring when this location is active.
— Busy —The device(s) to ring if the default device is busy.
— No Answer —The device(s) to ring if the default device is not answered.
Note that the busy and no answer devices do not forward to each other; only the default device(s) forward
automatically when busy or unanswered.
74
Cisco TelePresence Management Suite Provisioning Extension with Cisco VCS Deployment Guide