Manual

2. Above the explorer view, click Add Device Template. The Add Device Template dialog box is displayed.
3. Configure the fields as follows:
Display
Name
The FindMe device name; for example,
E20
.
Device
Type
The picture to display. Select from the following:
— Video Endpoint
— Telephone
— Mobile Phone
— Laptop
— Person
— Voice Mail.
You must select this device type for voicemail systems to ensure that the message is recorded
in the correct voicebox. The setting will make the diversion header include information about the
original called party.
— Video Mail
— Group
Device
Address
Pattern
The pattern to use to create the device address or number; for example,
{username}[e-mail]
.
4. Click Save.
72
Cisco TelePresence Management Suite Provisioning Extension with Cisco VCS Deployment Guide