Manual
Field Description
Maximum
Content
Quality
From the range of available qualities for content (presentation) sharing, select the maximum
quality that users will have access to.
The Maximum Content Quality setting is not applicable to CMRs that are hosted on MCU.
Minimum
Host
PIN Length
These settings control the requirements and options for PIN protection of CMRs based on the
template:
— First, enter the minimum number of digits for the host role's PIN in Minimum Host
PIN Length.
If you leave the setting as 0, the CMR owner is not required to use a PIN for any
participants.
— Select whether to allow the role of guest for CMRs based on this template.:
• The guest role has more limited privileges than the host role.
• If Allow Guest Role is disabled, all participants will have the same privileges and
PIN requirements as the host.
— If Allow Guest Role is enabled:
• Enter the minimum number of digits for the guest PIN in Minimum Guest PIN Length.
If you leave the setting as 0, the CMR owner is not required to use a PIN for the guest
role.
• Choose whether to enable Guest Lobby, which means guests must wait in the lobby
unless at least one host is present in the CMR.
For more information, see Setting up Host and Guest Roles in CMRs, page 63.
Allow Guest
Role
Minimum
Guest
PIN Length
Guest Lobby
Limit Number
of
Participants
Choose whether to set a maximum number of participants that will be allowed in the
Collaboration Meeting Room.
Maximum
Participants
Set a maximum number of participants to allow if Limit Number of Participants is enabled.
The upper limit for number of participants allowed in a CMR is controlled by Cisco
TelePresence Conductor. For more detail, see documentation for Cisco TelePresence
Conductor.
Limit
Conference
Duration
Choose whether to set a maximum duration for meetings in the CMR.
Enable this setting to prevent meetings where participants forget to disconnect, so that the
meeting continues.
Maximum
Minutes
Set a maximum meeting duration in minutes if
Limit Conference Duration
is enabled.
Allow
Multiscreen
Choose whether to allow participating telepresence systems to use more than one screen.
Maximum
Screens
Set a maximum number of screens allowed per participant if
Allow Multiscreen
is enabled.
Table 2 Collaboration Meeting Room template configuration fields (continued)
62
Cisco TelePresence Management Suite Provisioning Extension with Cisco VCS Deployment Guide