Manual

Configuring the Cisco TelePresence Content Server Release 5.x to Use an External Windows Media Streaming Server

How to Configure the Content Server to Use an External Windows Media Streaming Server

Step 7 Windows Server 2008 only: From the Properties tab, select Control protocol and double click WMS

HTTP Server Control Protocol to bring up the Properties window, shown in Figure 6.

Figure 6 WMS HTTP Server Control Protocol Properties

Step 8

Specify the IP addresses and port to use.

Note Beware of port conflicts that might be running on the remote Windows Media Server. Also,

ensure that the port you use for control is available; otherwise, publishing will fail.

Configuring the Content Server to Use the External Windows Media Streaming

Server

Now that you have set up authentication on the Windows Media streaming server, you need to configure

the Content Server to start streaming content from the external server by completing the following tasks:

1. Create a media server.

2. Create a template using that media server.

3. Create a recording alias that uses the template.