Technical References

Cisco TelePresence System Codec C90 API Reference Guide

xConfiguration Video Output Composite [5] Resolution

Select the preferred resolution for the monitor connected to the video output Composite connector.

This will force the resolution on the monitor.

Requires user role: ADMIN

Value space: <PAL/NTSC>

Range: PAL, NTSC

Example:

xConfiguration Video Output Composite 5 Resolution: NTSC

xConfiguration Video WallPaper

Select a background image (wallpaper) for the video screen when idle.

Requires user role: USER

Value space: <None/Custom/Growing/Summersky/Waves>

None: There is no background image on the screen, i.e. the background is black.

Custom: Use the custom wallpaper that is stored on the system as background image on the

screen. As default, there is no custom wallpaper stored and the background will be black. You

can upload a custom wallpaper to the system using the web interface. The maximum supported

resolution is 1920x1200.

Summersky, Growing, Waves: The chosen background image is shown on the screen.

Example:

xConfiguration Video Wallpaper: Summersky

Experimental configuration

The Experimental settings are for testing only and should not be used unless agreed with Cisco.

These settings are not documented and WILL change in later releases.

Contents

Introduction

About the API

xConfiguration

Appendices

xCommand

xStatus

xConfiguration