Technical References

D14 641.11 Codec C90 API Reference Guide TC6.2, JULY 2013. Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved. 68
Cisco TelePresence System Codec C90 API Reference Guide
xConfiguration Video Input Source [3] Connector
Select which video input connector to be active on video input source 3.
Requires user role: ADMIN
Value space: <HDMI/HDSDI/DVI>
DVI: Select DVI-I when you want to use the DVI-I 3 as input source 3.
HDMI: Select HDMI when you want to use the HDMI 3 as input source 3.
HDSDI: Select HD-SDI when you want to use the HD-SDI 3 as input source 3.
Example:
xConfiguration Video Input Source 3 Connector: DVI
xConfiguration Video Input Source [4] Connector
Select which video input connector to be active on video input source 4.
Requires user role: ADMIN
Value space: <HDMI/HDSDI>
HDMI: Select HDMI when you want to use the HDMI 4 as input source 4.
HDSDI: Select HD-SDI when you want to use the HD-SDI 4 as input source 4.
Example:
xConfiguration Video Input Source 4 Connector: HDMI
xConfiguration Video Input Source [5] Connector
Select which video input connector to be active on video input source 5.
Requires user role: ADMIN
Value space: <DVI/Composite/YC>
DVI: Select DVI-I when you want to use the DVI-I 5 as input source 5.
Composite: Select Composite when you want to use Composite as input source 5.
YC: Select YC when you want to use the S-Video (YC) as input source 5. Connect to the two
connectors marked Y/Comp and C.
Example:
xConfiguration Video Input Source 5 Connector: DVI
xConfiguration Video Input Source [1..5] Type
Set which type of input source is connected to the video input.
Requires user role: ADMIN
Value space: <other/camera/PC/DVD/document_camera>
Other: Select Other when some other type of equipment is connected to the selected video input.
Camera: Select Camera when you have a camera connected to the selected video input.
PC: Select PC when you have a PC connected to the selected video input.
DVD: Select DVD when you have a DVD player connected to the selected video input.
Document_Camera: Select Document_Camera when you have a document camera connected to
the selected video input.
Example:
xConfiguration Video Input Source 1 Type: PC
xConfiguration Video Input Source [1..5] PresentationSelection
In general, any input source can be used as a presentation source; normally, the main camera (self
view) will not be used as a presentation source.
This setting is used to define whether to display the presentation source on the local video system's
display automatically or not. To share the presentation with the far end always requires additional
action (tap Start Presenting on the Touch controller or the Presentation key on the remote control).
The default values for all input sources are Manual.
Requires user role: ADMIN
Value space: <Manual/Automatic/Hidden>
Manual: The content on the input source will not be presented on the local video system's display
before you select it. Use either the remote control or the Touch controller to choose which input
source to present.
Automatic: Any content on the input source will be presented on the local video system's display
automatically. If there is active content on more than one input source (which is set to Automatic)
the most recent one will be used.
Hidden: The input source is not expected to be used as a presentation source.
Example:
xConfiguration Video Input Source 1 PresentationSelection: Manual
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xConfiguration