Technical References

D14 641.11 Codec C90 API Reference Guide TC6.2, JULY 2013. Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved. 211
Cisco TelePresence System Codec C90 API Reference Guide
About disconnect cause types
The following parameters are logged when a call is
disconnected. The disconnect cause types are used in
disconnect events (xEvent) and also logged in xHistory
CallLogs.
CauseValue Proprietary. We recomend the use of CauseType and CauseCode.
CauseType Describes why the call was disconnected. The value space is { OtherLocal, LocalDisconnect,
UnknownRemoteSite, LocalBusy, LocalReject, InsufficientSecurity, OtherRemote, RemoteDisconnect,
RemoteBusy, RemoteRejected, RemoteNoAnswer, CallForwarded, NetworkRejected }
CauseString Describes the Cause Code.
CauseCode The disconnect Cause Codes are defined in SIP and Q.850.
CauseOrigin SIP, Q.850, internal.
Example 1:
xHistory CallLogs Call 694
...
*h xHistory CallLogs Call 694 DisconnectCauseValue: 2
*h xHistory CallLogs Call 694 DisconnectCause: “Normal”
*h xHistory CallLogs Call 694 DisconnectCauseType: RemoteDisconnect
*h xHistory CallLogs Call 694 DisconnectCauseCode: 16
*h xHistory CallLogs Call 694 DisconnectCauseOrigin: Q850
...
** end
Example 2:
xEvent DisconnectEvent
*e CallDisconnect CauseValue: 1
CauseType: “LocalDisconnect”
CauseString: “”
OrigCallDirection: “outgoing”
RemoteURI: “[e-mail]”
CallId: 89
CauseCode: 0
CauseOrigin: SIP
** end
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
Appendices