Technical References

D14 641.11 Codec C90 API Reference Guide TC6.2, JULY 2013. Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved. 202
Cisco TelePresence System Codec C90 API Reference Guide
xStatus Video Layout Site Output Frame VideoSourceContent
Shows the video source content type of each layout frame.
noSource: There is no source.
black: The frame is black.
main: The frame displays the main image from a local or a remote user.
self-view: The frame displays the self-view image.
selfviewPip: The frame displays the self-view image in PiP format.
speaker: The frame displays the image of the speaker.
speakerPip: The frame displays the image of the speaker in PiP format.
presentation: The frame displays the image of the presentation.
presentationPip: The frame displays the image of the presentation in PiP format.
presentationPreview: The frame displays the preview image of the presentation.
localInput: The frame displays the image of the local input source.
wallpaper: The frame displays the wallpaper.
gui: The frame displays the user interface.
internal: For internal use.
Value space of the result returned:
<noSource/black/main/selfview/selfviewPip/speaker/speakerPip/presentation/presentationPip/
presentationPreview/localInput/wallpaper/gui/internal>
Example:
xStatus Video Layout Site Output Frame VideoSourceContent
*s Video Layout Site 1 Output 1 Frame 1 VideoSourceContent: wallpaper
*s Video Layout Site 1 Output 2 Frame 1 VideoSourceContent: wallpaper
*s Video Layout Site 1 Output 3 Frame 1 VideoSourceContent: wallpaper
*s Video Layout Site 1 Output 3 Frame 2 VideoSourceContent: gui
*s Video Layout Site 1 Output 4 Frame 1 VideoSourceContent: wallpaper
*s Video Layout Site 1 Output 5 Frame 1 VideoSourceContent: wallpaper
** end
xStatus Video Selfview Mode
Shows whether selfview mode is set on or not.
Value space of the result returned:
<On/Off>
Example:
xStatus Video Selfview Mode
*s Video Selfview Mode: Off
** end
xStatus Video Selfview FullscreenMode
Shows whether selfview is set on full screen mode or not.
Value space of the result returned:
<On/Off>
Example:
xStatus Video Selfview FullscreenMode
*s Video Selfview FullscreenMode: Off
** end
xStatus Video Selfview PIPPosition
Shows the position of the selfview image on the screen.
Value space of the result returned:
<UpperLeft/UpperCenter/UpperRight/CenterLeft/CenterRight/LowerLeft/LowerRight>
Example:
xStatus Video Selfview PIPPosition
*s Video Selfview PIPPosition: LowerRight
** end
xStatus Video Selfview OnMonitorRole
Identifies which monitor(s) contains the selfview, if present.
Value space of the result returned:
<First/Second/Third/Fourth>
Example:
xStatus Video Selfview OnMonitorRole
*s Video Selfview OnMonitorRole: First
** end
xStatus Video PIP ActiveSpeaker Position
Shows the position of the active speaker’s image on the screen.
Value space of the result returned:
<UpperLeft/UpperCenter/UpperRight/CenterLeft/CenterRight/LowerLeft/LowerRight>
Example:
xStatus Video PIP ActiveSpeaker Position
*s Video PIP ActiveSpeaker Position: UpperCenter
** end
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatusxStatus