Technical References

D14 641.11 Codec C90 API Reference Guide TC6.2, JULY 2013. Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved. 199
Cisco TelePresence System Codec C90 API Reference Guide
xStatus Video Output DVI [2, 4] Connected
Indicates whether a display is connected to the DVI video output or not. NOTE: When a display
enters standby mode, the endpoint may not be able to detect it. The connector status will then
return False/Unknown even if the display is physically connected.
True - A display is connected to the video output connector
False - No display is connected to the video output. Applicable to digital outputs only.
Unknown - Because both digital and analog are supported on the DVI-I connector, in some
situations it is uncertain whether a display is connected or not. Therefore, the state is Unknown by
default. However, when EDID is received from a display the state will be True.
Value space of the result returned:
<True/False/Unknown>
Example:
xStatus Video Output DVI Connected
*s Video Output DVI 2 Connected: Unknown
** end
xStatus Video Output Legacy [5] Resolution Height
Shows the resolution height (in pixels) for the video output Legacy (Composite).
Value space of the result returned:
<120..3000>
Example:
xStatus Video Output Legacy 5 Resolution Height
*s Video Output Legacy 5 Resolution Height: 480
** end
xStatus Video Output Legacy [5] Resolution Width
Shows the resolution width (in pixels) for the video output Legacy (Composite).
Value space of the result returned:
<176..4000>
Example:
xStatus Video Output Legacy 5 Resolution Width
*s Video Output Legacy 5 Resolution Width: 720
** end
xStatus Video Output Legacy [5] Resolution RefreshRate
Shows the resolution refresh rate (Hz) for the video output Legacy (Composite).
Value space of the result returned:
<1..300>
Example:
xStatus Video Output Legacy 5 Resolution RefreshRate
*s Video Output Legacy 5 Resolution RefreshRate: 60
** end
xStatus Video Layout
Shows the top level overview of the video layout status.
xStatus Video Layout Mode
Indicates type of layout currently used by the codec, custom or default.
Value space of the result returned:
<Default/Custom>
Example:
xStatus Video Layout Mode
*s Video Layout Mode: Default
** end
xStatus Video Layout PresentationView
Returns information about the presentation view mode.
Value space of the result returned:
<Default/Maximized/Minimized>
Example:
xStatus Video Layout PresentationView
*s Video Layout PresentationView: "Default"
** end
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatusxStatus