Technical References

D14 641.11 Codec C90 API Reference Guide TC6.2, JULY 2013. Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved. 183
Cisco TelePresence System Codec C90 API Reference Guide
Security status
xStatus Security FIPS Mode
Shows the FIPS mode status.
Value space of the result returned:
<On/Off>
Example:
xStatus Security FIPS Mode
*s Security FIPS Mode: Off
** end
SIP status
xStatus SIP
Shows the top level overview of the SIP status.
xStatus SIP Proxy [1] Status
Shows the status of the communication between the endpoint and the SIP Proxy server.
Active: The communication between the endpoint and the SIP Proxy is active.
DNSFailed: The attempt to establish communication to the DNS server failed.
Off: There is no communication between the endpoint and the SIP Proxy.
Timeout: The attempt to establish communication to the SIP Proxy timed out.
UnableTCP: The system is unable to use TCP as the transport method.
UnableTLS: The system is unable to use TLS as the transport method.
Unknown: The status of the communication is not known.
Value space of the result returned:
<Active/DNSFailed/Off/Timeout/UnableTCP/UnableTLS/Unknown>
Example:
xStatus SIP Proxy 1 Status
*s SIP Proxy 1 Status: Active
** end
xStatus SIP Proxy [1] Address
Shows the address of the SIP Proxy that the system communicates with.
Value space of the result returned:
<String>
Example:
xStatus SIP Proxy 1 Address
*s SIP Proxy 1 Address: "192.0.2.50"
** end
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatusxStatus