Technical References

D14 641.11 Codec C90 API Reference Guide TC6.2, JULY 2013. Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved. 177
Cisco TelePresence System Codec C90 API Reference Guide
xStatus Network CDP Address
Returns the first network address of both receiving and sending devices.
Value space of the result returned:
<String>
Example:
xStatus Network CDP Address
*s Network 1 CDP Address: "192.0.1.20"
** end
xStatus Network CDP PrimaryMgmtAddress
Returns the management address used to configure and monitor the switch the endpoint is
connected to.
Value space of the result returned:
<String>
Example:
xStatus Network CDP PrimaryMgmtAddress
*s Network 1 CDP PrimaryMgmtAddress: "10.1.1.2"
** end
xStatus Network CDP SysName
Returns the SysName as configured in the switch the endpoint is connected to.
Value space of the result returned:
<String>
Example:
xStatus Network CDP SysName
*s Network 1 CDP SysName: ""
** end
xStatus Network CDP SysObjectID
Returns the SysObjectID as configured in the switch the endpoint is connected to.
Value space of the result returned:
<String>
Example:
xStatus Network CDP SysObjectID
*s Network 1 CDP SysObjectID: ""
** end
xStatus Network CDP VoIPApplianceVlanID
Identifies the VLAN used for VoIP traffic from the endpoint to the switch. For more information see
documentation of the IEEE 802.1Q protocol.
Value space of the result returned:
<String>
Example:
xStatus Network CDP VoIPApplianceVlanID
*s Network 1 CDP VoIPApplianceVlanID: "300"
** end
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatusxStatus