Technical References

D14 641.11 Codec C90 API Reference Guide TC6.2, JULY 2013. Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved. 159
Cisco TelePresence System Codec C90 API Reference Guide
xStatus Diagnostics Call [1..n] Channels IncomingAudioChannel [1..n] Netstat 1
MaxJitter
xStatus Diagnostics Call [1..n] Channels IncomingVideoChannel [1..n] Netstat 1
MaxJitter
xStatus Diagnostics Call [1..n] Channels IncomingDataChannel [1..n] Netstat 1 MaxJitter
xStatus Diagnostics Call [1..n] Channels OutgoingAudioChannel [1..n] Netstat 1
MaxJitter
xStatus Diagnostics Call [1..n] Channels OutgoingVideoChannel [1..n] Netstat 1
MaxJitter
xStatus Diagnostics Call [1..n] Channels OutgoingDataChannel [1..n] Netstat 1 MaxJitter
Shows the maximum jitter that has been measured during last time interval (5 seconds).
Value space of the result returned:
<Integer>
Example:
xStatus Diagnostics Call 27 Channels OutgoingDataChannel 327 Netstat 1
MaxJitter
*s Diagnostics Call 27 Channels OutgoingDataChannel 327 Netstat 1
Ma xJitter: 0
** end
GPIO status
xStatus GPIO Pin [1..4] State
Shows the current state of each GPIO pin. The default state is High (+12V). When activated the state
is Low (0V).
Value space of the result returned:
<High/Low>
Example:
xStatus GPIO Pin 1 State
*s GPIO Pin 1 State: High
** end
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatusxStatus