Technical References

D14 641.11 Codec C90 API Reference Guide TC6.2, JULY 2013. Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved. 144
Cisco TelePresence System Codec C90 API Reference Guide
xStatus Audio Module [0] HardwareID
Shows the DNAM HardwareID.
Value space of the result returned:
<String>
Example:
xStatus Audio Module 0 HardwareID
*s Audio Module 0 HardwareID: "B40F69"
** end
xStatus Audio Module [0] Connector
Shows which audio output connector the audio module is attached to.
Value space of the result returned:
<"Line_out.1"/"Line_out.3">
Example:
xStatus Audio Module 0 Connector
*s Audio Module 0 Connector: "Line _ out.1"
** end
Call status
xStatus Call
Shows the top level overview of the call status. The call identity is used when query for additional
information about the call.
xStatus Call [1..n] Status
Shows the status of a call. You can run the command xStatus Call to find the call identity.
Value space of the result returned:
<Idle/Dialling/Ringing/Connecting/Connected/Disconnecting/OnHold/EarlyMedia/Preserved/
RemotePreserved>
Example:
xStatus Call 27 Status
*s Call 27 Status: Connected
** end
xStatus Call [1..n] Direction
States the direction of the call initiation. You can run the command xStatus Call to find the call
identity.
Value space of the result returned:
<Incoming/Outgoing>
Example:
xStatus Call 27 Direction
*s Call 27 Direction: Outgoing
** end
xStatus Call [1..n] Protocol
Shows the call protocol of the incoming or outgoing call. You can run the command xStatus Call to
find the call identity.
Value space of the result returned:
<H323/SIP>
Example:
xStatus Call 27 Protocol
*s Call 27 Protocol: "h323"
** end
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatusxStatus