Technical References

D14642.13 Codec C40-C60 API Reference Guide TC6.3, NOVEMBER 2013. Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved. 78
Cisco TelePresence System Codec C40/C60 API Reference Guide
xConfiguration Video Layout RemoteLayoutFamily
Select which video layout family to be used for the remote participants.
Requires user role: ADMIN
Value space: <Auto/FullScreen/Equal/PresentationSmallSpeaker/PresentationLargeSpeaker/
Prominent/Overlay/Single>
Auto: The default layout family, as given by the local layout database, will be used as the remote
layout. For more information about the layout database, see the command: xCommand Video
Layout LoadDb.
FullScreen: The FullScreen layout family will be used as the remote layout. It means that the active
speaker or presentation will be shown in full screen. Using this value is not recommended as from
TC6.0.
Equal: The Equal layout family will be used as the remote layout. All videos have equal size, as long
as there is space enough on the screen.
PresentationSmallSpeaker: The PresentationSmallSpeaker layout family will be used as the remote
layout. Using this value is not recommended as from TC6.0.
PresentationLargeSpeaker: The PresentationLargeSpeaker layout family will be used as the
remote layout. Using this value is not recommended as from TC6.0.
Prominent: The Prominent layout family will be used as the remote layout. The active speaker,
or the presentation if present, will be a large picture, while the other participants will be small
pictures. Transitions between active speakers are voice switched.
Overlay: The Overlay layout family will be used as the remote layout. The active speaker, or the
presentation if present, will be shown in full screen, while the other participants will be small
pictures-in-picture (PiP). Transitions between active speakers are voice switched.
Single: The active speaker, or the presentation if present, will be shown in full screen. The other
participants are not shown. Transitions between active speakers are voice switched.
Example:
xConfiguration Video Layout RemoteLayoutFamily: Auto
xConfiguration Video Monitors
Set the monitor layout mode.
Requires user role: ADMIN
Value space: <Single/Dual/DualPresentationOnly>
Single: The same layout is shown on all monitors.
Dual: The layout is distributed on two monitors.
DualPresentationOnly: All participants in the call will be shown on the first monitor, while the
presentation (if any) will be shown on the second monitor.
Example:
xConfiguration Video Monitors: Single
xConfiguration Video OSD Mode
The Video OSD (On Screen Display) Mode lets you define if information and icons should be
displayed on screen.
Requires user role: ADMIN
Value space: <Off/On>
Off: Hide the on screen menus, icons and indicators.
On: Display the on screen menus, icons and indicators.
Example:
xConfiguration Video OSD Mode: On
xConfiguration Video OSD WallPaperSelection
Applies to the on screen menu (OSD). The wall paper selection menu can be hidden outside the
administrator settings menu and visible inside, or it can be visible both inside and outside the
administrator settings menu. The administrator settings menu can be password protected.
Requires user role: ADMIN
Value space: <Off/On>
Off: The wall paper selection menu is hidden outside the administrator settings menu and visible
inside. To change the wallpaper, navigate to: Home > Settings > Administrator Settings. If required
log in with your username and password. Then navigate to Wall Paper.
On: The wall paper selection menu is visible both inside and outside the administrator settings
menu. To change the wallpaper, navigate to: Home > Settings > Wall Paper. Or navigate to Home
> Settings > Administrator Settings. If required log in with your username and password. Then
navigate to Wall Paper.
Example:
xConfiguration Video OSD WallPaperSelection: On
xConfiguration Video OSD LanguageSelection
Applies to the on screen menu (OSD). The language selection menu can be hidden outside the
administrator settings menu and visible inside, or it can be visible both inside and outside the
administrator settings menu. The administrator settings menu can be password protected.
Requires user role: ADMIN
Value space: <Off/On>
Off: The language selection menu is hidden outside the administrator settings menu and visible
inside. To change the language, navigate to: Home > Settings > Administrator Settings. If required
log in with your username and password. Then navigate to Language.
On: The language selection menu is visible both inside and outside the administrator settings
menu. To change the language, navigate to: Home > Settings > Language. Or navigate to Home
> Settings > Administrator Settings. If required log in with your username and password. Then
navigate to Language.
Example:
xConfiguration Video OSD LanguageSelection: On
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xConfigu ration