Technical References

D14642.13 Codec C40-C60 API Reference Guide TC6.3, NOVEMBER 2013. Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved. 77
Cisco TelePresence System Codec C40/C60 API Reference Guide
xConfiguration Video PIP Presentation DefaultValue Position
Determine the position on screen of the presentation picture-in-picture (PiP). The setting only takes
effect when the presentation is explicitly minimized to a PiP, for example using the remote control or
the Touch controller. The setting takes effect from the next call onwards; if changed during a call, it
will have no effect on the current call.
Requires user role: ADMIN
Value space: <Current/UpperLeft/UpperCenter/UpperRight/CenterLeft/CenterRight/LowerLeft/
LowerRight>
Current: The position of the presentation PiP will be kept unchanged when leaving a call.
UpperLeft: The presentation PiP will appear in the upper left corner of the screen.
UpperCenter: The presentation PiP will appear in the upper center position.
UpperRight: The presentation PiP will appear in the upper right corner of the screen.
CenterLeft: The presentation PiP will appear in the center left position.
CentreRight: The presentation PiP will appear in the center right position.
LowerLeft: The presentation PiP will appear in the lower left corner of the screen.
LowerRight: The presentation PiP will appear in the lower right corner of the screen.
Example:
xConfiguration Video PIP Presentation DefaultValue Position: Current
xConfiguration Video Layout DisableDisconnectedLocalOutputs
Prevent the built-in layout engine from setting layouts on local outputs that have no monitor
connected.
Requires user role: ADMIN
Value space: <Off/On>
Off: The built-in layout engine sets layout on all local outputs, also the ones not having any monitor
connected.
On: The built-in layout engine does only set layout on local outputs having a monitor connected.
Example:
xConfiguration Video Layout DisableDisconnectedLocalOutputs: Off
xConfiguration Video Layout Engine LocalMode
Sets the operating mode of the built-in layout engine.
Requires user role: ADMIN
Value space: <Disabled/Enabled/DisabledPIPs>
Disabled: The built-in layout engine does not display any frames in the layout on the local output.
Enabled: The built-in layout engine displays all frames in the layout on all local outputs.
DisabledPIPs: The built-in layout engine does not display any PIP frame in the layout on the local
output.
Example:
xConfiguration Video Layout Engine LocalMode: Enabled
xConfiguration Video Layout LocalLayoutFamily
Select which video layout family to use locally.
Requires user role: ADMIN
Value space: <Auto/FullScreen/Equal/PresentationSmallSpeaker/PresentationLargeSpeaker/
Prominent/Overlay/Single>
Auto: The default layout family, as given by the layout database, will be used as the local layout.
For more information about the layout database, see the xCommand Video Layout LoadDb
command.
FullScreen: The FullScreen layout family will be used as the local layout. It means that the active
speaker or presentation will be shown in full screen. Using this value is not recommended as from
TC6.0.
Equal: The Equal layout family will be used as the local layout. All videos have equal size, as long
as there is space enough on the screen(s).
PresentationSmallSpeaker: The PresentationSmallSpeaker layout family will be used as the local
layout. Using this value is not recommended as from TC6.0.
PresentationLargeSpeaker: The PresentationLargeSpeaker layout family will be used as the local
layout. Using this value is not recommended as from TC6.0.
Prominent: The Prominent layout family will be used as the local layout. The active speaker, or the
presentation if present, will be a large picture, while the other participants will be small pictures.
Transitions between active speakers are voice switched.
Overlay: The Overlay layout family will be used as the local layout. The active speaker, or the
presentation if present, will be shown in full screen, while the other participants will be small
pictures-in-picture (PiP). Transitions between active speakers are voice switched.
Single: The active speaker, or the presentation if present, will be shown in full screen. The other
participants are not shown. Transitions between active speakers are voice switched.
Example:
xConfiguration Video Layout LocalLayoutFamily: Auto
xConfiguration Video Layout PresentationDefault View
Determine how the presentation will show on screen when you start sharing a presentation.
Requires user role: ADMIN
Value space: <Default/Minimized/Maximized>
Default: The presentation is a part of the layout.
Minimized: The presentation starts up in PIP mode.
Maximized: The presentation starts up in full screen mode.
Example:
xConfiguration Video Layout PresentationDefault View: Default
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xConfigu ration