Technical References

D14642.13 Codec C40-C60 API Reference Guide TC6.3, NOVEMBER 2013. Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved. 68
Cisco TelePresence System Codec C40/C60 API Reference Guide
xConfiguration Standby StandbyAction
Define the camera position when going into standby mode.
Requires user role: ADMIN
Value space: <None/PrivacyPosition>
None: No action.
PrivacyPosition: Turns the camera to a sideways position for privacy.
Example:
xConfiguration Standby StandbyAction: PrivacyPosition
xConfiguration Standby WakeupAction
Define the camera position when leaving standby mode.
Requires user role: ADMIN
Value space: <None/Preset1/Preset2/Preset3/Preset4/Preset5/Preset6/Preset7/Preset8/
Preset9/Preset10/Preset11/Preset12/Preset13/Preset14/Preset15/RestoreCameraPosition/
DefaultCameraPosition>
None: No action.
Preset1 to Preset15: When leaving standby the camera position will be set to the position defined
by the selected preset.
RestoreCameraPosition: When leaving standby the camera position will be set to the position it
had before entering standby.
DefaultCameraPosition: When leaving standby the camera position will be set to the factory default
position.
Example:
xConfiguration Standby WakeupAction: RestoreCameraPosition
SystemUnit configuration
xConfiguration SystemUnit Name
Enter a System Name to define a name of the system unit. If the H.323 Alias ID is configured on the
system then this ID will be used instead of the system name. The system name will be displayed:
1) When the codec is acting as an SNMP Agent.
2) Towards a DHCP server.
Requires user role: ADMIN
Value space: <S: 0, 50>
Format: String with a maximum of 50 characters.
Example:
xConfiguration SystemUnit Name: "Meeting Room"
xConfiguration SystemUnit MenuLanguage
Select the language to be used in the menus on screen, or on the Touch controller. All languages
are not supported on both user interfaces. The default language is English.
Requires user role: USER
Value space: <English/ChineseSimplified/ChineseTraditional/Catalan/Czech/Danish/Dutch/Finnish/
French/German/Hungarian/Italian/Japanese/Korean/Norwegian/Polish/PortugueseBrazilian/Russian/
Spanish/SpanishLatin/Swedish/Turkish/Arabic/Hebrew>
Example:
xConfiguration SystemUnit MenuLanguage: English
xConfiguration SystemUnit CallLogging Mode
Set the call logging mode for calls that are received or placed by the system. The call logs may then
be viewed via the web interface or using the xHistory command.
Requires user role: ADMIN
Value space: <Off/On>
Off: Disable logging.
On: Enable logging.
Example:
xConfiguration SystemUnit CallLogging Mode: On
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xConfigu ration