Technical References

ManualsBrandsCisco ManualsCollaboration EndpointsCisco TelePresence Codec C60

Cisco TelePresence System Codec C40/C60 API Reference Guide

Extended logging mode for troubleshooting

You can switch on extended logging from the web interface.

Extended logging may help diagnose network issues and

problems during call setup.

Extended logging uses more of your video system’s

resources, and may cause the system to underperform.

Therefore extended logging should be enabled just to

reproduce an issue, and then disabled.

Other Web interface enhancements

• Call state indication available from the top bar on all

pages in the web interface.

• Far end camera control.

xConfiguration

New configurations

xConfiguration NetworkServices WelcomeText: <Off/On>

xConfiguration Provisioning ExternalManager

AlternateAddress: <S: 0, 64>

xConfiguration Security Audit Server PortAssignment: <Auto/

Manual>

xConfiguration SIP Profile Ice Mode: <Auto/Off/On>

Replacing SIP Profile Ice

xConfiguration SIP Profile Ice DefaultCandidate: <Host/Rflx/

Relay>

Replacing SIP Profile IceDefaultCandiate

xConfiguration SIP Profile Turn DiscoverMode: <Off/On>

xConfiguration SIP Profile Turn DropRflx: <Off/On>

xConfiguration SIP ANAT: <Off/On>

xConfiguration SIP PreferredIPMedia: <IPv4/IPv6>

xConfiguration SIP PreferredIPSignaling: <IPv4/IPv6>

xConfiguration Video Layout Engine LocalMode: <Disabled/

Enabled/DisabledPIPs>

xConfiguration Video Layout PresentationDefault View:

xConfiguration Video Layout

DisableDisconnectedLocalOutputs: <Off/On>

xConfiguration Video OSD CallSettingsSelection: <Off/On>

Configurations that are removed

xConfiguration Cameras PowerLine Frequency

xConfiguration Conference PacketLossResilience Mode

xConfiguration Conference LyncCompatibility

xConfiguration SIP Profile Ice

Replaced by SIP Profile Ice Mode

xConfiguration SIP Profile IceDefaultCandidate

Replaced by SIP Profile Ice DefaultCandiate

Configurations that are modified

xConfiguration Conference DefaultCall Protocol

OLD: <H323/Sip/H320>

NEW: <Auto/H323/Sip/H320>

xConfiguration Conference CallProtocolIPStack

OLD: <IPv4/IPv6>

NEW: <Dual/IPv4/IPv6>

xConfiguration SIP Profile Type

OLD: <Standard/Alcatel/Avaya/Cisco/Microsoft/Nortel>

NEW: <Standard/Cisco>

xConfiguration SIP Profile Ice Mode

OLD: <Off/On>

NEW: <Auto/Off/On>

xConfiguration SystemUnit MenuLanguage

OLD: <English/ChineseSimplified/ChineseTraditional/

Czech/Danish/Dutch/Finnish/French/German/

Hungarian/Italian/Japanese/Korean/Norwegian/Polish/

PortugueseBrazilian/Russian/Spanish/SpanishLatin/

Swedish/Turkish>

NEW: <English/ChineseSimplified/ChineseTraditional/

Catalan/Czech/Danish/Dutch/Finnish/French/German/

Hungarian/Italian/Japanese/Korean/Norwegian/Polish/

PortugueseBrazilian/Russian/Spanish/SpanishLatin/

Swedish/Turkish/Arabic/Hebrew>

xConfiguration Video OSD Output[n]

OLD: <1/2>

NEW: <Auto/1/2>

xConfiguration Video Output HDMI[n] MonitorRole

OLD: <First/Second/PresentationOnly/Recorder>

NEW: <Auto/First/Second/PresentationOnly/Recorder>

xConfiguration Video Output DVI[n] MonitorRole

OLD: <First/Second/PresentationOnly/Recorder>

NEW: <Auto/First/Second/PresentationOnly/Recorder>

Contents

Introduction

About the API

xConfiguration

Appendices

xCommand

xStatus

Introduction