Technical References

D14642.13 Codec C40-C60 API Reference Guide TC6.3, NOVEMBER 2013. Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved. 54
Cisco TelePresence System Codec C40/C60 API Reference Guide
NetworkPort configuration
xConfiguration NetworkPort [2] Mode
Define if the network port 2 shall be enabled for direct pairing with a Cisco TelePresence Touch
controller.
NOTE: Restart the system for any change to this setting to take effect.
Requires user role: ADMIN
Value space: <Inactive/DirectPairing>
Inactive: Set the NetworkPort 2 to Inactive when no device is connected.
DirectPairing: Set the NetworkPort 2 to DirectPairing when you have a Cisco TelePresence Touch
controller connected to the port. This will enable for direct pairing between the Touch controller
and the codec.
Example:
xConfiguration NetworkPort 2 Mode: Inactive
NetworkServices configuration
xConfiguration NetworkServices H323 Mode
Determine whether the system should be able to place and receive H.323 calls or not.
Requires user role: ADMIN
Value space: <Off/On>
Off: Disable the possibility to place and receive H.323 calls.
On: Enable the possibility to place and receive H.323 calls (default).
Example:
xConfiguration NetworkServices H323 Mode: On
xConfiguration NetworkServices HTTP Mode
Set the HTTP mode to enable/disable access to the system through a web browser. The web
interface is used for system management, call management such as call transfer, diagnostics and
software uploads.
NOTE: Restart the system for any change to this setting to take effect.
Requires user role: ADMIN
Value space: <Off/On>
Off: The HTTP protocol is disabled.
On: The HTTP protocol is enabled.
Example:
xConfiguration NetworkServices HTTP Mode: On
xConfiguration NetworkServices SIP Mode
Determine whether the system should be able to place and receive SIP calls or not.
Requires user role: ADMIN
Value space: <Off/On>
Off: Disable the possibility to place and receive SIP calls.
On: Enable the possibility to place and receive SIP calls (default).
Example:
xConfiguration NetworkServices SIP Mode: On
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xConfigu ration