Technical References

D14642.13 Codec C40-C60 API Reference Guide TC6.3, NOVEMBER 2013. Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved. 208
Cisco TelePresence System Codec C40/C60 API Reference Guide
xStatus Video Input Source [1..3] Resolution Height
Shows the resolution height (in pixels) for the video input source.
Value space of the result returned:
<0..3000>
Example:
xStatus Video Input Source 1 Resolution Height
*s Video Input Source 1 Resolution Height: 1080
** end
xStatus Video Input Source [1..3] Resolution Width
Shows the resolution width (in pixels) for the video input source.
Value space of the result returned:
<0..4000>
Example:
xStatus Video Input Source 1 Resolution Width
*s Video Input Source 1 Resolution Width: 1920
** end
xStatus Video Input Source [1..3] Resolution RefreshRate
Shows the resolution refresh rate (Hz) for the video input source.
Value space of the result returned:
<0..300>
Example:
xStatus Video Input Source 1 Resolution RefreshRate
*s Video Input Source 1 Resolution RefreshRate: 50
** end
xStatus Video Input Source [1..3] Resolution FormatType
Shows the resolution format type for the video input source.
Value space of the result returned:
<Unknown/AnalogCVTBlanking/AnalogCVTReducedBlanking/AnalogGTFDefault/
AnalogGTFSecondary/AnalogDiscreteTiming/AnalogDMTBlanking/AnalogCEABlanking/Digital>
Example:
xStatus Video Input Source 1 Resolution FormatType
*s Video Input Source 1 Resolution FormatType: Digital
** end
xStatus Video Input Source [1..3] Resolution FormatStatus
Shows the resolution format status for the video input source.
Value space of the result returned:
<Ok/AnalogOutOfRange/AnalogNotFound/Interlaced/Error/Unknown>
Example:
xStatus Video Input Source 1 Resolution FormatStatus
*s Video Input Source 1 Resolution FormatStatus: Ok
** end
xStatus Video Input Source [1..3] MediaChannelId
For internal use only.
Value space of the result returned:
<Integer>
Example:
xStatus Video Input Source MediaChannelId
*s Video Input Source 1 MediaChannelId: 2
*s Video Input Source 2 MediaChannelId: 3
** end
xStatus Video Input HDMI [1..2] Connected
Shows if there is something connected to the HDMI connector. Not all connections can be detected.
Value space of the result returned:
<True/False/Unknown>
Example:
xStatus Video Input HDMI 1 Connected
*s Video Input HDMI 1 Connected: True
** end
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatusxStatus