Technical References

D14642.13 Codec C40-C60 API Reference Guide TC6.3, NOVEMBER 2013. Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved. 192
Cisco TelePresence System Codec C40/C60 API Reference Guide
*s Provisioning CUCM CAPF OperationResult: NotSet
** end
xStatus Provisioning CUCM ProvisionSecurity
Shows the provisioned configuration file type.
None: The provisioned configuration file is plain text or the endpoint has not been provisioned.
Signed: The provisioned configuration file is signed.
Encrypted: The provisioned configuration file is signed and encrypted.
Value space of the result returned:
<None/Signed/Encrypted>
Example:
xStatus Provisioning CUCM ProvisionSecurity
*s Provisioning CUCM ProvisionSecurity: None
** end
xStatus Provisioning CUCM CTL State
Shows whether the Certificate Trust List (CTL) file is installed or not.
Value space of the result returned:
<NotInstalled/Installed>
Example:
xStatus Provisioning CUCM CTL State
*s Provisioning CUCM CTL State: Installed
** end
xStatus Provisioning CUCM ExtensionMobility Enabled
Indicates if Extension Mobility is enabled for the UCM registered device.
Value space of the result returned:
<True/False>
Example:
xStatus Provisioning CUCM ExtensionMobility Enabled
*s Provisioning CUCM ExtensionMobility Enabled: False
** end
xStatus Provisioning CUCM ExtensionMobility LoggedIn
Indicates whether you are logged in to Extension Mobility or not.
Value space of the result returned:
<True/False>
Example:
xStatus Provisioning CUCM ExtensionMobility LoggedIn
*s Provisioning CUCM ExtensionMobility LoggedIn: False
** end
xStatus Provisioning CUCM ExtensionMobility LastLoggedInUserId
Returns the user id last logged in to the system. Only in use if UCM Extension Mobility is enabled,
and UCM is configured to remember the last logged in user on an endpoint.
Value space of the result returned:
<String>
Example:
xStatus Provisioning CUCM ExtensionMobility LastLoggedInUserId
*s Provisioning CUCM ExtensionMobility LastLoggedInUserId: "User 1"
** end
xStatus Provisioning CUCM TVS Proxy [n]Server
Returns the address of the TVS server in form of a hostname, FQDN or IPv4 address.
Value space of the result returned:
<String>
Example:
xStatus Provisioning CUCM TVS Proxy 1 Server
*s Provisioning CUCM TVS Proxy 1 Server: "192.0.2.0"
** end
xStatus Provisioning CUCM TVS Proxy [n]IPv6Address
Returns the address of the TVS server in form of a hostname, FQDN or IPv6 address.
Value space of the result returned:
<String>
Example:
xStatus Provisioning CUCM TVS Proxy 1 IPv6Address
*s Provisioning CUCM TVS Proxy 1 IPv6Address: ""
** end
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatusxStatus