Technical References

D14642.13 Codec C40-C60 API Reference Guide TC6.3, NOVEMBER 2013. Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved. 105
Cisco TelePresence System Codec C40/C60 API Reference Guide
xCommand CallLog Missed Dismiss
Review the call log of dismissed calls. If a logtag is given as argument, that specific call is deleted
from the log. If no logtag is given the system deletes the complete missed calls log. The LogTag
values for missed calls are found by issuing the xHistory CallLog Missed command.
Requires user role: USER
Parameters:
LogTag: <0..2147483647>
Example:
xCommand CallLog Missed Dimissed LogTag:119
*r DismissResult (status=OK):
** end
CamCtrlPip commands
xCommand CamCtrlPip
Show or hide the camera self-view in a small window (picture in picture).
Mode: Select whether the self-view picture in picture is on or off.
Duration: Set how long the self-view is shown for on screen.
Requires user role: USER
Parameters:
Mode(r): <On/Off>
Duration: <0..60>
Example:
xCommand CamCtrlPip Mode: On
*r CamCtrlPipResult (status=OK):
** end
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xCommand