Release Notes

52
Release Notes for Cisco TelePresence System Software Release 1.10
Caveats in the CTS 1.10 Releases
CSCuh54966
Symptom During a multipoint call using an MCU, the presentation image appears pixelated on the lower
part of the image.
Conditions This condition occurs when the audio and video are sent securely, but the presentation
(media) content is non-secure. The presentation media is sent securely in error, which leads to the
pixelation of the image.
Workaround There is no workaround.
Caveats in Cisco TelePresence System Software Release 1.10.1
The following sections show the resolved and unresolved caveats for CTS software release 1.10.1:
• Unresolved Caveats in CTS Release 1.10.1, page 52
• Resolved Caveats in CTS Release 1.10.1, page 53
Unresolved Caveats in CTS Release 1.10.1
CSCuf32686
Symptom During a multipoint call where one participant is a Cisco Unified IP Phone connected via audio
add-in, an endpoint shares a presentation. When the IP Phone goes on hold, the presentation (on the
endpoint that performed the audio add-in) appears green or disappears. Other endpoints can still see the
presentation.
Conditions Issue occurs during a multipoint call where one participant is an IP Phone connected via
audio add-in and another endpoint shares a presentation. The IP Phone goes on hold.
Workaround Perform one of the following actions:
1. Unshare, then share the presentation by tapping the UnShare option on the Touch Panel, then
tapping Share.
2. Issue a Hold/Resume sequence from the endpoint that added the audio participant into the call.
3. Disconnect and reconnect the presentation source by unplugging the presentation cable, then
plugging it back in.
If you perform this action before the hold/resume action completes, perform it again after the
endpoint resumes the call.
4. Have a non-host site that is not sharing the presentation add the audio-only participant into the call.