Release Notes

51
Release Notes for Cisco TelePresence System Software Release 1.10
Caveats in the CTS 1.10 Releases
CSCui65578
Symptom In a low-bandwidth interop call, after CTS shares a BFCP presentation, the remote endpoint
loses incoming video. BFCP presentation fails and CTS reverts to switched presentation mode.
Conditions Issue occurs during an interop call (not MUX or TIP), where bandwidth is lower than 2 mbps.
Workaround Raise the bandwidth to a value greater than 2 mbps.
Resolved Caveats in CTS Release 1.10.2
CSCug94889
Symptom Systems running CTS or TX software are dropped during a conference using the
Cisco TelePresence Server.
Conditions This condition occurs during an ad-hoc, secure conference using a Cisco TelePresence Server
running TS 3.1 with a system running CTS software release 1.10.1 or earlier, or TX software release
6.0.2 or earlier.
Workaround If your Cisco TelePresence server is running release 3.1 or later, upgrade your CTS systems
to CTS release 1.10.2 or later, and upgrade your TX systems to TX release 6.0.3 or later.
CSCug28175
Symptom During a point-to-point call between a TX9x00 system and a TX1310 65 system, a shared
presentation may appear pixelated intermittently on the remote endpoint.
Conditions This issue occurs during a point-to-point call between a TX9x00 system and a TX1310 65
system, where one system shares a presentation.
Workaround There is no workaround.