Release Notes

50
Release Notes for Cisco TelePresence System Software Release 1.10
Caveats in the CTS 1.10 Releases
CSCug32505
Symptom When the administrator uses the TMS administrative interface to delete an active meeting, the
TelePresence system exits the meeting but still shows the scheduled meeting and the Join button on the
Touch 12.
Conditions Issue occurs when an active meeting is canceled by the administrator using the TMS
administrative interface.
Workaround Wait for a few seconds until the meeting information and Join button disappear.
CSCug52535
Symptom Some TMS alerts and prompts appear even while the system is not in a call.
Conditions The TelePresence system is managed by TMS but is not in a call.
Workaround There is no workaround.
CSCug80319
Symptom When a presentation is shared during a call between two CTS endpoints, the remote endpoint
may see the presentation image slightly cut off on the left side.
Conditions Issue occurs on the remote endpoint, during a call where both endpoints are running CTS
software release 1.9.
Workaround There is no workaround.
CSCuh12678
Symptom During a call, TX9x00 system camera image appears pink or purple, both on the remote
endpoint screen and in self view mode.
Conditions Issue occurs on systems running camera firmware 1.9.2 or 1.9.3.
Workaround Reboot the system codec or recalibrate the camera to adjust the white balance.