Release Notes

47
Release Notes for Cisco TelePresence System Software Release 1.10
Caveats in the CTS 1.10 Releases
CSCuh18153
Symptom When a TX or CTS system joins an MCU call as the first participant, the audio prompt that
plays is corrupted slightly.
Conditions This issue occurs when a CTS or TX system enters an MCU call as the first participant.
Workaround There is no workaround.
CSCuh64139
Symptom During a point-to-point call between a TelePresence endpoint and another endpoint that does
not use MUX or TIP (known as an interop call), a third endpoint calls the VCS-registered endpoint, and
the three endpoints enter a conference (either an MCU or TelePresence conference).
If it is an MCU conference: after entering the conference, the TelePresence endpoint does not see any
incoming video, and the shared presentation appears on the center screen. If it is a TelePresence
conference: only XGA resolution is supported and all other resolutions are disabled.
Conditions A conflict in BFCP server mode occurs between the TelePresence endpoint and the server
(whether MCU or TelePresence server). The conflict disables BFCP server mode.
Workaround Press hold and resume on the TelePresence endpoint.
CSCui33067
Symptom When attempting to perform an audio add-in, the directory appears, but there is no keypad.
Conditions This condition appears during an audio add-in attempt during a TelePresence conference.
Workaround Tap the New Call button to display the keypad.