Release Notes

46
Release Notes for Cisco TelePresence System Software Release 1.10
Caveats in the CTS 1.10 Releases
Resolved Caveats in Release 1.10.3
CSCuf52211
Symptom The presentation freezes at the remote sites when content is being sent after 2-3 hours on a call
using the TelePresence Server. The presentation was frozen on all 1.9.5 endpoints, including CTS 1300,
500-32, 500-37, TX1310, CTS1100, CTS1300, and not frozen on endpoints running 1.9.2. CTS3000
running 1.9.5 is presenting in this case. This condition appears whether the presentation display is a
monitor or a projector, or is using an external presentation display.
The same condition is seen on systems using CTMS without the TelePresence Server; however this
condition is seen after a longer time (more than 13 hours).
Conditions This condition is seen on CTS endpoints running 1.9.5 and connected to CTMS (1.9.3) and
TPS 2.3 (1.57).
Workaround Press Hold and Resume to resolve this problem.
CSCug80319
Symptom During a conference with another Cisco TelePresence immersive endpoint running Release
1.9, the endpoint running 1.9 software shares a presentation. The endpoint running 1.10 software
displays a cropped image of the presentation.
Conditions This condition appears whether the presentation display is a monitor or a projector, or is using
an external presentation display.
Workaround No workaround is available.
CSCug80344
Symptom You experience one-way audio during a conference.
Conditions The following conditions cause the issue:
1. You place a call from a TX system to another system that is not a CTS (CTS 1000, 1100, 1300-65,
3000, 3010, 3200, or 3210) or TX (TX1310-65, TX9000, or TX9200) system. This type of call is
known as an interop call.
2. You add another CTS or TX system to the call.
Workaround Hold, and then resume, the conference.
You can prevent this issue by calling the CTS or TX system first, then placing the interop call.