Release Notes

44
Release Notes for Cisco TelePresence System Software Release 1.10
Caveats in the CTS 1.10 Releases
CSCuj70026
Symptom A Cisco TelePresence System 3000, 3010, 3200, 3101, or TX9000 system intermittently shows
as an audio conference, and a blank display is seen on one or two of the three screens.
Conditions This condition is seen when a call is going through an MCU with a Cisco TelePresence
System 3000, TX1310-65, and TX9000.
Workaround There is no workaround.
CSCul24865
Symptom Video corruption is seen between a Cisco TelePresence System TX9000 and a Lync 2013
client.
Conditions This condition is seen when in a call between a Cisco TelePresence CTS or TX system and a
Lync client.
Workaround Use a Cisco TelePresence Server or a Cisco TelePresence MCU between the
Cisco TelePresence system and the Lync client.
CSCul13329
Symptom A Cisco TelePresence Systems (CTS) in a secure call will not hear audio participants after the
SIP Session Refresh timer.
Conditions This issue is present in the following circumstances:
• Secured CTS audio only call to an IP Phone.
• Secured CTS to CTS call with an audio add-in participant.
Workaround Complete the following steps:
1. Issue a hold/resume sequence on the CTS endpoint.
2. Set the call to non-secure.