Release Notes

43
Release Notes for Cisco TelePresence System Software Release 1.10
Caveats in the CTS 1.10 Releases
Resolved Caveats in Release 1.10.4
CSCug90524
Symptom When clicking on the magnifying glass under “System Status” in the Cisco TelePresence
Administration GUI, the projector status is shown as unknown.
Conditions This condition exists whether you are in or out of a call, or whether or not you are using the
projector to share a presentation.
Workaround There is no workaround.
CSCuh01240
Symptom Occasionally, an incorrect error message such as “ERROR Auxiliary Control Unit status is Not
Ready(Check Device).” periodically appears in the sysop log.
Conditions This condition occurs on Cisco TelePresence running 1.10.x releases.
Workaround There is no workaround.
CSCui72815
Symptom A Cisco TelePresence System (CTS) 500-32 or CTS 500-37 that uses a Cisco Unified IP Phone
for call control receives a call, and the call is muted. If a second call is received and answered by the
CTS, the first call is unmuted.
Conditions This condition arises when a CTS 500-32 or CTS 500-37 is muted and receives another
incoming call.
Workaround Mute the CTS again.