Release Notes

35
Release Notes for Cisco TelePresence System Software Release 1.10
Caveats in the CTS 1.10 Releases
CSCuo98569
Symptom CTS-Touch 12 is stuck at checkbox #5 and the message “Unable to load boot image”.
Conditions The path MTU between the Unified CM TFTP node and the codec is less than 1500 bytes.
Workaround Lower the MTU on the Unified CM to match the path MTU.
CSCup48115
Symptom No main video is seen during a Cisco TelePresence call.
Conditions This condition occurs during a call between a TX1300-65 or TX9xxx system and a Cisco
TelePresence system with a C40 codec.
Workaround There is no workaround.
CSCup92876
Symptom CTS core unreregisters when change the bandwidth is changed from Auto to 250KB on DX
devices.
Conditions Make a video call from DX device to CTS device. Change video bandwidth from Auto to
250KBPS. CTS device Unregistered from CUCM.
Workaround There is no workaround.
CSCuq49459
Symptom While dialing Live Desk, the system omits the last digit from the URI.
Conditions User dialing Live Desk support from Touch omits the last character.
Workaround Dial the number manually, or remove one character from the URI.