Release Notes

6 Release Notes for Cisco Small Business SPA51X IP Phones Firmware Version 7.5.5
Release Notes
CSCue95588 A typo in the phone Web GUI; in the Custom CA Status
section, "Custom CA Provisioning Status" is missing an "n".
CSCuf93984 During a call pickup event, the phone should not update the
remote party CallerID when the Remote-Party-ID or P-
Assert-Identity header is not provided in the SIP re-INVITE
message.
CSCue98552 A parameter, <Use Line Keys For BLF List> is needed to use
the line keys first for Broadsoft BLF list feature.
Previously, the phone used only side-car keys for Broadsoft
BLF list feature.
CSCub68624 In Hebrew mode, when the user edits the personal address
book, the editing cursor moves to the opposite direction of
the button pressed.
CSCue98287 The phone becomes unresponsive when long SDES
CNAME (greater than 47 characters) or long NAME (greater
than 31 characters) is used in RTCP packets.
CSCue60002 When Do not Disturb (DND) is enabled on SPA508G phone,
paging calls are received.
CSCuf22909 When the phone is in an active call and initiates another call,
the corresponding BLF button blinks red as if the phone is
ringing.
CSCue78248 In SPCP mode, the incoming FXO calls ring as internal calls
for Cisco SPA508/500S phones.
CSCuf91421 In SPCP mode, the phone becomes unresponsive while
browsing the SETUP menu in Dutch.
CSCug45164 The SIP TCP session gets reconnected on wrong ports
upon TCP connection failure when the TCP Port values for
Min. and Max. are the same.
Identifier Summary