Release Notes

Release Notes for Cisco Small Business SPA51X IP Phones Firmware Version 7.5.5 5
Release Notes
CSCue44542 For Cisco XML Service, EXECUTEITEM does not work
properly for playback of DTMF tones.
CSCue25867 The phone becomes unresponsive on a slow network,
when using sidecar (500 or 500DS) with many BLF
configured, as it does not receive all the 200 OK responses
from the server.
CSCud36606/
CSCtw80367
In SPCP mode, the phone loses BLF information.
CSCue31446 On a shared line, quick offhook/onhook triggers the phone
to send quick NOTIFY messages to the server, and the
server sends 480 code to the phone.
Added a parameter, <SCA Unseize Delay> to allow shared
line unseize delay to be configured.
CSCue82323 Users cannot use a semi-colon in the report rule as semi-
colon is used as the delimiter for configuration report rule
and status report rule.
NOTE Use space as the delimiter.
CSCue81529 Increase the SIP account password parameter to a
maximum of 64 characters.
CSCue57774 The phone constantly reboots, when the provisioning
profile rule is too long (greater than 256) using EMS & MUID
macros.
CSCue58292 When a call is not answered, the call does not connect to
the voice mail if no ringtone is selected.
Added a parameter, <Silent Ring Duration> to control the
duration of the silent ring.
CSCuf07838 When parameter <User Equal Phone> is enabled, the
headers; FROM, TO, and the request line of all the SIP
messages during a call will be attached with a
<user=phone> parameter.
CSCue98720 In the SPCP mode, the phone displays incorrect system
message in French.
Identifier Summary