Release Notes

Release Notes for Cisco Small Business SPA51X IP Phones Firmware Version 7.5.5 3
Release Notes
• Bulgarian (bg)
• Croatian (hr)
Feature Enhancement in Firmware Version 7.5.5
Display of Name and Extension for BLF Keys
A parameter, <BLF Label Display Mode> is added to display both name and
extension for Broadsoft BLF keys. The default display value is "Name," and the
possible display values are "Name/Ext/Both".
NOTE The parameter can be configured via phone UI also.
When the parameter is set to "Both:"
—The phone alternates between name and extension in 5-seconds’ interval if BLF
is configured on the line keys.
—The phone shows both name and extension if BLF is configured on the side car
keys.
—The phone renders both name and extension in a single line using the selected
font. If the space is not enough, it successively tries smaller-sized fonts. If it fails
even with 8 points, then it renders name and extension in two lines.
Display of Dialed Digits
The phone is configured to show the digits entered when a call is connected or is
proceeding.
A new parameter, <Show DTMF Digits When Connected> is introduced to select
the expected behavior options, which is in Admin Login > Advanced > Voice >
Phone.
The options are "No"/"Yes"/"Masked."
—If 'No' is selected, no digits are displayed.
—If 'Yes' is selected, most recently dialed digits (upto 15) are displayed.
—If 'Masked' is selected, it behaves like 'Yes', except the digits are masked with
‘*’s.
On SPA5XX phone, when a call is connected or proceeding, the dialed digits are
displayed on the second row of the call screen.