Release Notes

Release Notes for Cisco Small Business IP Phone SPA50X and SPA30X Firmware Version 7.4.7 7
Release Notes
CSCtj32326 SPA30X/
SPA50X
Phone sends 200 OK ACK with only its first CODEC preference. The
phone's behavior is now changed such that:
1. Set ExtN > Audio Configuration > Release Unused Codec: no
2. Phone's 200 OK responses to INVITE now include preferred
CODEC list with the extension's preferred CODEC listed first.
CSCtj32333 SPA30X/
SPA50X
Phone was using its preferred CODEC from the SIP INVITE 200 OK
SDP negotiation instead of the preference listed in the 200 OK.
CSCtj71183 SPA30X/
SPA50X
Phone's SPC utility incorrectly lists the XML as supporting “5x5”
phones. This has changed to “50x” phones and does not affect
functionality in any way.
CSCtj74644 SPA30X/
SPA50X
The phone's syslog output did not properly display .[periods] and
instead displayed "%2E" in IP addresses or macro expanded
$SWVER variables.
CSCtj77032 SPA30X/
SPA50X
SIP PUBLISH report is not sent if call is canceled while being
transferred.
CSCtj77165 SPA30X/
SPA50X
RTCP-XR packets are only sent to 1 party in conference call instead
of all parties.
CSCtj79804 SPA30X/
SPA50X
With Feature Key Synchronization (FKS) and call forward no answer
(CFNA) the ringtime period is based on seconds, not ringtimes.
CFNA is now handled only on the server so ringtimes will not
trigger local timer on phone.
CSCtj80646 SPA30X/
SPA50X
When being provisioned and receiving a 301 (moved permanently)
redirect, the phone did not submit a request to the new address
provided in the redirect.
CSCtj81280 SPA30X/
SPA50X
The $ISCUST, $INCOMINGNAME, $REMOTENUMBER, $AUTHID,
$DISPLAYNAME variables were not properly expanded during XML
provisioning.
CSCtj86094 SPA30X/
SPA50X
In the SIP PUBLISH report, the from and to tags in the DialogID field
are incorrect when the call is forwarded.
CSCtj86116 SPA30X/
SPA50X
In the SIP PUBLISH report, the Call-ID-Parameter in the DialogID
field is incorrect.
CSCtj86371 SPA30X/
SPA50X
In the SIP PUBLISH report, the Remote Address port is always
5060.
Identifier Phone Model Summary